EX-AZM 170-11ZRKA-R/P-3GD

Item number: 103049508

EX-AZM 170-11ZRKA-R/P-3GD

Item number: 103049508

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:

EX-AZM 170-(1)Z(2)K(3)-24VAC/DC-(4)-3G/D

(1)
11	1 NO contact/1 NC contact
02	2 NC contact

(2)
without	Latching force 5 N
R	Latching force 30 N

(3)
without	Power to unlock
A	Power to lock

(4)
without	Manual release
1637	Gold-plated contacts

Not all component variants, which are possible according to this order code are available and/or technically feasible.

IDC method of termination
Manual release
Explosion protection for ATEX Zones 2 and 22
1 Cable entry M 20 x 1.5
Interlock with protection against incorrect locking.
High holding force
90 mm x 84 mm x 30 mm

Ordering data

Article number (order number)	103049508
EAN (European Article Number)	4030661624884

Explosion protection

Explosion protection: regulations	EN IEC 60079-0 EN IEC 60079-15 EN 60079-31
Explosion protection zones	2 22
Explosion protection category	3G 3D
Explosion protection designation	D II 3G Ex nC IIB T5 Gc X D II 3D Ex tc IIIC T80°C Dc X
Manufacturer declaration	ATEX Zone 2 and 22

General data

Standards	EN IEC 60947-5-1
Working principle	electromechanical
Housing material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

General data - Features

Power to lock	Yes
Manual release	Yes
Number of auxiliary contacts	1
Number of safety contacts	1

Safety classification

Standards	EN ISO 13849-1
Performance Level, up to	c
Category	1
B_10D Normally-closed contact (NC)	2,000,000 Operations
Note	Electrical life on request.
B_10D Normally-open contact (NO)	1,000,000 Operations
Mission time	20 Year(s)

Safety classification - Fault exclusion

Performance Level, up to	d
Category	3
Note	for 2-channel use and with suitable logic unit.
Mission time	20 Year(s)

Mechanical data

Mechanical life, minimum	1,000,000 Operations
Impact energy, maximum	7 J
Holding force	1,000 N
Latching force	30 N
Positive break travel	11 mm
Positive break force, minimum	8.5 N
Actuating speed, maximum	1 m/s
Mounting	Screws
Type of the screw head	Flat head screw
Tightening torque of the fastening screws for the housing cover, minimum	0.4 Nm
Tightening torque of the fastening screws for the housing cover, maximum	0.5 Nm
Tightening torque of the cable gland	4.5 Nm

Mechanical data - Connection technique

Termination	IDC method of termination
Cable cross-section of the cable glands, minimum	6.5 mm
Cable cross-section of the cable glands, maximum	12 mm
Cable section, minimum	2 x 1.0 mm², flexible
Cable section, maximum	1 x 1 mm², flexible

Mechanical data - Dimensions

Length of sensor	30 mm
Width of sensor	90 mm
Height of sensor	84 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-15 ... +45 °C
Note (Relative humidity)	non-condensing non-icing

Ambient conditions - Insulation values

Rated insulation voltage U_i	250 VAC
Rated impulse withstand voltage U_imp	4 kV

Electrical data

Thermal test current	2 A
Rated control voltage	24 VAC
Rated control voltage	24 VDC
Utilisation category AC-15	230 VAC
Utilisation category AC-15	2 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	2 A
Electrical power consumption, maximum	10 W
Switching element	NO contact, NC contact
Switching principle	Slow action
Maximum switching frequency	1,000 /h
Material of the contacts, electrical	Silver

Electrical data - Magnet control

Magnet switch-on time	100 %
Test pulse duration, maximum	5 ms
Test pulse interval, minimum	50 ms

Scope of delivery

Scope of delivery	Actuator must be ordered separately. Including Ex-certified screwed cable gland and screw plug

Note

Note (General)	This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules
Note (Manual release)	bottom For manual release using M5 triangular key, available as accessory

Product picture (catalogue individual photo)

ID: kazm1f04

| 620.3 kB | .jpg | 352.425 x 356.658 mm - 999 x 1011 px - 72 dpi

| 48.7 kB | .png | 74.083 x 74.789 mm - 210 x 212 px - 72 dpi

| 71.0 kB | .jpg | 122.061 x 123.472 mm - 346 x 350 px - 72 dpi

Dimensional drawing basic component

ID: 1azm1g03

| 96.8 kB | .cdr |

| 3.7 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi

| 75.8 kB | .jpg | 352.778 x 245.886 mm - 1000 x 697 px - 72 dpi

Switch travel diagram

Information on switch travel diagram
ICO_LEG_sw-close Contact closed
ICO_LEG_sw-open Contact open
ICO_LEG_sw-var Setting range
ICO_LEG_sw-l Latching point
ICO_LEG_sw-p Positive opening path/angle
VS Adjustable range of NO contact
VÖ Adjustable range of NC contact
N After travel

The switching routes shown for the closer and opener contacts can be transferred to other contact combinations.

ID: kazm1s02

| 19.7 kB | .cdr |

| 2.0 kB | .png | 74.083 x 25.753 mm - 210 x 73 px - 72 dpi

| 50.1 kB | .jpg | 352.778 x 123.119 mm - 1000 x 349 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: kazm1k12

| 52.5 kB | .ai | 297 x 210.002 mm - 841 x 595 px - 72 dpi

| 45.9 kB | .jpg | 352.778 x 112.183 mm - 1000 x 318 px - 72 dpi

| 2.5 kB | .png | 74.083 x 23.636 mm - 210 x 67 px - 72 dpi

Assembly example

ID: kazm1m06

| 98.4 kB | .cdr |

Operating principle

ID: kazm1a70

| 213.5 kB | .jpg | 352.778 x 656.519 mm - 1000 x 1861 px - 72 dpi

| 6.5 kB | .png | 74.083 x 137.583 mm - 210 x 390 px - 72 dpi

EU Conformity Declaration

Pdf

EU-Konformitätserklärung

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Erklärung:

Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen.

Bezeichnung des Bauteils:

EX-AZM170
EX-AZM170 I

Typ:

siehe Typenschlüssel

Kennzeichnung:

D II 3G Ex nC IIB T5 Gc
D II 3D Ex tc IIIC T80°C Dc

Beschreibung des Bauteils:

Verriegelung mit elektromagnetischer Zuhaltung für Sicherheitsfunktionen

Einschlägige Richtlinien:	Maschinenrichtlinie	2006/42/EG
	EMV-Richtlinie	2014/30/EU
	Explosionsschutzrichtlinie (ATEX)	2014/34/EU
	RoHS-Richtlinie	2011/65/EU

Angewandte Normen:

EN 60947-5-1:2017
EN ISO 14119:2014
EN IEC 60079-0:2018
EN IEC 60079-15:2019
EN 60079-31:2014

Bevollmächtigter für die Zusammenstellung der technischen Unterlagen:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Ort und Datum der Ausstellung:

Wuppertal, 10. Mai 2022

Rechtsverbindliche Unterschrift
Philip Schmersal
Geschäftsführer

Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 11/26/2024, 1:50 PM

Cart

Login Register now

EX-AZM 170-11ZRKA-R/P-3GD

EX-AZM 170-11ZRKA-R/P-3GD

Ordering data

Explosion protection

General data

General data - Features

Safety classification

Safety classification - Fault exclusion

Mechanical data

Mechanical data - Connection technique

Mechanical data - Dimensions

Ambient conditions

Ambient conditions - Insulation values

Electrical data

Electrical data - Magnet control

Scope of delivery

Note

Language filter

Datasheet

Operating instructions and Declaration of conformity

Brochure

SISTEMA-VDMA library

Download the latest version of Adobe Reader

Product picture (catalogue individual photo)

Dimensional drawing basic component

Switch travel diagram

Diagram

Assembly example

Operating principle