MZM 100 ST2-1P2PWRE-A
MZM 100 ST2-1P2PWRE-A
Product type description: MZM 100 (1) (2)-(3)(4)(5)-A |
(1) | |
without | Guard locking monitored > |
B | Actuator monitored |
(2) | |
ST | Connector plug M23, 8+1-pole |
ST2 | Connector plug M12, 8-pole |
(3) | |
1P2P | 1 p-type diagnostic output and 2 p-type safety outputs (only in connection with "Solenoid interlock monitored") |
1P2PW | Similar to -1P2P, combined diagnostic signal: guard door closed and solenoid interlock locked (only in connection with "Solenoid interlock monitored") |
1P2PW2 | Similar to -1P2P, combined diagnostic signal: guard door closed and can be locked (only in connection with "Actuator monitored") |
SD2P | serial diagnostic output and 2 p-type safety outputs |
(4) | |
without | without latching (only in connection with "Solenoid interlock monitored") |
R | electrical latching force, typically 30 N |
RE | adjustable latching force, typically 30 … 100 N |
(5) | |
M | permanent magnet, typically 15 N |
- Vernelås overvåket
- Stikkontakt M12, 8-polet
- driftsspenning
- Automatisk forriging
- Magnetisk forrigling med innovativt og unikt driftsprinsipp
- 40 mm x 179 mm x 40 mm
- Elektronisk kontaktfritt, kodet syste,
- Plast bryterhus
- Max. lengde på sensorkjedet 200 m
- 3 lysdioder som viser driftsbetingelser
- Sensorteknologi tillater et offset mellom aktivator og sperre på ± 5 mm vertikalt og ± 3 mm horisontalt
- Intelligent diagnose
- Selvovervåkende seriekabling
Bestillingsinformasjon
Produkt-typebetegnelse |
MZM 100 ST2-1P2PWRE-A |
Artikkelnummer (bestillingsnummer) |
101211066 |
EAN (European Article Number) |
4030661389127 |
eCl@ss number, version 12.0 |
27-27-26-03 |
eCl@ss number, version 11.0 |
27-27-26-03 |
eCl@ss-nummer, versjon 9.0 |
27-27-26-03 |
ETIM number, version 7.0 |
EC002593 |
ETIM number, version 6.0 |
EC002593 |
Tillatelser - Standard
|
TÜV cULus UKCA |
Gobale egenskaper
Standard |
EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-3 EN IEC 61508 |
Generell informasjon |
Universell koding |
Kodenivå i henhold til ISO 14119 |
lav |
Aktivt prinsipp |
induktiv |
Kapslingsmateriale |
Plast, glassfiber forsterket termoplast, selvslukkende |
Reaksjonstid, maksimum |
150 ms |
Farens varighet, maksimum |
150 ms |
Bruttovekt |
700 g |
Gobale egenskaper - Karakteristikker
driftsspenning |
Ja |
Vernelås overvåket |
Ja |
Fast posisjon |
Ja |
Kortslutningsdeteksjon |
Ja |
Kortslutningsgjenkjenning |
Ja |
Seriekabling |
Ja |
Sikkerhetsfunksjoner |
Ja |
Integrert indikator, status |
Ja |
Antall sikkerhetskontakter |
2 |
Klassifisering
Standarder, forskrifter |
EN ISO 13849-1 EN IEC 61508 |
Klassifisering - sikkerhetslåsfunksjon
Performance Level, up to |
e |
Kontrollkategori |
4 |
PFH-verdi |
3,54 x 10⁻⁹ /h |
Safety Integrity Level (SIL), suitable for applications in |
3 |
Mission time |
20 år |
Mekaniske data
Mekanisk levetid, minimum |
1 000 000 bevegelser |
Note (Mechanical life) |
Aktueringshastighet ≤ 0,5 m/s Operasjoner for vakter ≤ 5 kg |
Holding force, typically |
750 N |
Holding force, guaranteed |
500 N |
Holdekraft, minimum |
30 N |
Holdekraft, maksimum |
100 N |
Type of the fixing screws |
2x M6 |
Tightening torque of the fixing screws |
8 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
Sikret bryteravstand "PÅ" |
0 mm |
Sikret bryteravstand "AV" |
1 mm |
Mechanical data - Connection technique
Length of sensor chain, maximum |
200 m |
Note (length of the sensor chain) |
Cable length and cross-section change the voltage drop dependiing on the output current |
Note (series-wiring) |
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD |
Konnektor stikk |
Konnektor M12, 8-polet |
Mekaniske data - mål
Lengde på sensor |
40 mm |
Bredde på sensor |
40 mm |
Høyde på sensor |
177,5 mm |
Omgivelsesbetingelser
Tetthetsgrad |
IP65 IP67 |
Ambient temperature |
-25 ... +55 °C |
Storage and transport temperature |
-25 ... +70 °C |
Relativ fuktighet, minimum |
30 % |
Relativ fuktighet, maksimum |
95 % |
Note (Relative humidity) |
ikke kondenserende ikke-ising |
Resistent mot vibrasjoner iht. EN 60068-2-6 |
10 … 150 Hz, Amplitude 0,35 mm / 5 g |
sjokkresitanse |
30 g / 11 ms |
Protection class |
III |
Permissible installation altitude above sea level, maximum |
2 000 m |
Ambient conditions - Insulation values
Isolasjonsspenning |
32 VDC |
Nominell impulsmotstandsspenning |
0,8 kV |
Overvoltage category |
III |
Forurensningsgrad iht. VDE 0100 |
3 |
Elektriske data
Operating voltage |
24 VDC -15 % / +10 % |
No-load supply current I0, typical |
100 mA |
Current consumption with magnet ON, average |
350 mA |
Current consumption with magnet ON, peak |
550 mA / 10 ms |
Rated operating voltage |
24 VDC |
driftssstrøm |
1 100 mA |
Nødvendig nominell kortslutningsstrøm iht EN 60947-5-1 |
100 A |
External wire and device fuse rating |
2 A gG |
Tid til beredskap, maksimum |
4 000 ms |
Brytefrekvens, maksimum |
1 Hz |
Elektriske data - Solenoidkontroll INN
Designation, Magnet control |
IN |
Koblingsterskeler for magnetinnganger |
-3 V … 5 V (Low) 15 V … 30 V (High) |
Driftsstrøm for solenoidkontroll ved 24 V |
10 mA |
Magnet switch-on time |
100 % |
Test pulse duration, maximum |
5 ms |
Test pulse interval, minimum |
40 ms |
Classification ZVEI CB24I, Sink |
C0 |
Classification ZVEI CB24I, Source |
C1 C2 C3 |
Electrical data - Safety digital inputs
Designation, Safety inputs |
X1 and X2 |
Koplingsterskler på sikkerhetsinnganger |
−3 V … 5 V (Low) 15 V … 30 V (High) |
Driftsstrøm for sikkerhetsinngangene ved 24 V |
5 mA |
Test pulse duration, maximum |
1 ms |
Test pulse interval, minimum |
100 ms |
Classification ZVEI CB24I, Sink |
C1 |
Classification ZVEI CB24I, Source |
C1 C2 C3 |
Electrical data - Safety digital outputs
Designation, Safety outputs |
Y1 and Y2 |
Driftssstrøm (sikkerhetsutganger) |
250 mA |
Sikkerhetsutgang |
short-circuit proof, p-type |
Voltage drop Ud, maximum |
1 V |
Leakage current Ir, maximum |
0,5 mA |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
0,25 A |
Test pulse interval, typical |
1000 ms |
Test pulse duration, maximum |
1 ms |
Classification ZVEI CB24I, Source |
C1 |
Classification ZVEI CB24I, Sink |
C1 |
Elektriske data - diagnoseutgang
Designation, Diagnostic outputs |
OUT |
Design of control elements |
short-circuit proof, p-type |
Voltage drop Ud, maximum |
2 V |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
0,05 A |
Statusvisning
Merk (Lysdiode for brytertilstandsindikator) |
Koblingsforhold: gul lysdiode Feil funksjonell defekt: rød lysdiode Tilførselsspenning UB: grønn lysdiode |
Pin-tildeling
PIN 1 |
A1 Matespenning |
PIN 2 |
X1 Sikkerhetsinngang 1 |
PIN 3 |
A2 GND |
PIN 4 |
Y1 Sikkerhetsutgang 1 |
PIN 5 |
OUT DIagnostisk utgang |
PIN 6 |
X2 Sikkerhetsinngang 2 |
PIN 7 |
Y2 Sikkerhetsutgang 2 |
PIN 8 |
IN Solenoidkontroll |
inkludert ved levering
inkludert ved levering |
Actuator must be ordered separately. |
Tilbehør
Anbefaling (aktivator) |
MZM 100-B1.1 |
Note
Note (General) |
As long as the actuating unit is applied to the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
Språk filter
Datablad
Bruksanvisning og konformitetserklæring
TÜV-sertifisering
UL sertifikat
UKCA certificate
Brosjyre
SISTEMA-VDMA Bibliotek/Library
Last ned den nyeste versjonen av Adobe Reader
Produktbilde (enkelt katalogbilde)
Dimensjonsriktig tegning grunnenhet
Dimensjonsriktig tegning diverse
kablingseksempel
Kontaktplassering
UK Declaration of Conformity |
Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
Name of the component: | MZM 100 MZM 100 B |
Type: | See ordering code |
Description of the component: | Interlocking device with electromagnetic interlock for safety functions (MZM 100) and safety switch with interlocking functions (MZM 100 B) |
Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
Electromagnetic Compatibility Regulations | 2016 | |
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
Designated standards: | EN 60947-5-3:2013 EN ISO 14119:2013 EN ISO 13849-1:2015 IEC 61508 parts 1-7:2010 |
Approved body for Type Examination: | TÜV Rheinland UK Ltd. 1011 Stratford Road Solihull, B90 4BN ID: 2571 |
Type examination certificate: | 01/205U/5778.00/23 |
UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
Place and date of issue: | Wuppertal, April 18, 2023 |
Authorised signature Philip Schmersal Managing Director |
EU Declaration of Conformity |
Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
Name of the component: | MZM 100 MZM 100 B |
Type: | See ordering code |
Description of the component: | Interlocking device with electromagnetic interlock for safety functions (MZM 100) and safety switch with interlocking functions (MZM 100 B) |
Relevant Directives: | Machinery Directive | 2006/42/EC |
EMC-Directive | 2014/30/EU | |
RoHS-Directive | 2011/65/EU |
Applied standards: | EN 60947-5-3:2013 EN ISO 14119:2013 EN ISO 13849-1:2015 IEC 61508 parts 1-7:2010 |
Notified body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
EC-Type Examination Certificate: | 01/205/5778.00/20 |
Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
Place and date of issue: | Wuppertal, November 18, 2020 |
Authorised signature Philip Schmersal Managing Director |
Schmersal Nordiska AB, F O Petersons gata 28, S-421 31 Västra Frölunda
Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.
Generert til 27.12.2024, 13:47