SEPG05.3.3.1.22/95
SEPG05.3.3.1.22/95
Product type description: SEPK02.0.(1).(2).(3)/(4).(5) SEPG05.3.(1).(2).(3)/(4).(5) SEP01.0.(1).(2).(3)/(4).(5) SEP01.4.(1).(2).(3)/(4).(5) SEPLC05.2.(1).(2).(3)/(4).(5) SEP07.0.(1).(2).(3)/(4).(5) SEP09.0.(1).(2).(3)/(4).(5) |
Command devices make and head diameter (control parts / emergency stop) depending on ➁ (with SEP09.0... emergency stop not featured) |
(1) | |
1 | Schmersal 55 mm / Schmersal 49 mm |
2 | Schmersal 42 mm / Schmersal 49 mm or Siemens 40 mm / Schmersal 49 mm |
3 | Schmersal 42 mm / Schmersal 38,5 mm or Siemens 40 mm / Siemens 40 mm |
4 | Schmersal 55 mm / Schmersal 38,5 mm |
L | Empty enclosure with 22.3 mm holes (no command devices installed) |
S-XXXX | Special version with 4-digit serial number |
(2) | |
0 | Command devices from Schmersal |
1 | Command devices from Schmersal or Schmersal / Siemens |
(3) | |
0 | Installation diameter of command devices (22.3 mm) |
1 | Installation diameter of command devices (30.5 mm) |
(4) | |
95 | NC contacts and NO contacts of control parts in separated form |
(5) | |
E1 | Mushroom button with actuating force 10.5 N |
E2 | Mushroom button with actuating force 7.0 N |
Z1 | Emergency stop with 2 NC contacts and 2 NO contacts (not with SEPK02.0....) |
Z2 | Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent instead of emergency stop) |
Z3 | Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent instead of emergency stop) |
Z4 | Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent in addition to emergency stop) |
Z5 | Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent in addition to emergency stop) |
Z6 | Pre-punched Al panel with 11 x Ø 22.3 mm holes (only for SEPLC05.2...) |
Z7 | As with Z6 though holes are sealed with dummy plugs (only for SEPLC05.2...) |
- Nødstoppknapp i metallutgave mm
- 2 svarte betjeningsknapper (posisjonering av deler) Ø 40 mm mm i Plastdesign
- formstøpt lett legering
- 2 kapslet del
- Stativ- og veggmontering mulig
- Ergonomisk betjening
- Kabelhoder og relé kan monteres i den indre delen
- Betjeningspanelet er egnet for minst 8 ekstra kommandoenheter og indikatorlamper
- Hull bores under dekselet og sentralt hull Ø = 22,3mm
Bestillingsinformasjon
Produkt-typebetegnelse |
SEPG05.3.3.1.22/95 |
Artikkelnummer (bestillingsnummer) |
101172761 |
EAN (European Article Number) |
4250116202904 |
eCl@ss number, version 12.0 |
27-37-12-19 |
eCl@ss number, version 11.0 |
27-37-12-19 |
eCl@ss-nummer, versjon 9.0 |
27-37-12-19 |
ETIM number, version 7.0 |
EC001260 |
ETIM number, version 6.0 |
EC001260 |
Tillatelser - Standard
|
cULus |
Gobale egenskaper
Standard |
EN ISO 13850 EN ISO 13851 EN IEC 60947-5-1 EN IEC 60947-5-5 EN IEC 60947-1 |
Kapslingsmateriale |
Aluminium |
Materialet for husbelegg |
pulverbelagt |
Bruttovekt |
4 300 g |
Gobale egenskaper - Karakteristikker
Egnet for NØD-AV |
Ja |
Konstruksjonssett mulig |
Ja |
Antall nødstoppknapper |
1 |
Antall åpnere |
2 |
Antall lukkere |
2 |
Antall betjenings-trykknapper (posisjonerer deler) |
2 |
Mekaniske data
Mekanisk levetid, minimum |
10 000 000 bevegelser |
Mechanical data - Connection technique
Konnektor stikk |
Skrueforbindelse M20 x 1.5 |
Kabeldimensjon, maksimum |
1,5 mm² |
Mekaniske data - mål
Bredde |
494 mm |
Høyde |
184 mm |
Dybde |
160 mm |
Langde x bredde x høyde |
Betjenings-trykknapper (posisjoneringsdeler): 40 mm Nødstopp forrigling trykknapp: 40 mm |
Omgivelsesbetingelser
Tetthetsgrad |
IP65 |
Ambient conditions - Insulation values
Isolasjonsspenning |
440 V |
Elektriske data
Termisk teststrøm |
10 A |
Utstyrskategori AC-15 |
250 VAC |
Utstyrskategori AC-15 |
8 A |
Utstyrskategori DC-13 |
24 VDC |
Utstyrskategori DC-13 |
5 A |
Tilbehør
Anbefaling (produktkombinasjon) |
SRB201ZH SRB200ZHX1 SRB 201ZHX3 |
Note
Note (General) |
1 NO/1 NC-kontakt per enhet, 1 NO/1 NC-kontakt for nødstopp Valgfritt: aktuatorer med lav aktueringskraft Den sentrale delen er egnet for montering av opptil 10 ekstra kommandoenheter og indikatorlys (Ø 22 mm) |
Note (Number of Emergency Stop button) |
Består av: 3SB3000-1GA11; 3SB3400-OB; 3SB3400-OC Består av: 3SB3000-1HA20; 3SB3400-OA |
Språk filter
Datablad
Bruksanvisning og konformitetserklæring
UL sertifikat
SISTEMA-VDMA Bibliotek/Library
Last ned den nyeste versjonen av Adobe Reader
Produktbilde (enkelt katalogbilde)
Dimensjonsriktig tegning grunnenhet
UK Declaration of Conformity |
Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
Name of the component: | SEPK02.0... / SEPG05.3... / SEP01.0... / SEP01.4... / SEPLC05.2... / SEP07... / SEP09.0... |
Type: | See ordering code |
Description of the component: | Two-hand control panel with1) and without emergency-stop (optionally with stand) |
Relevant legislation: | 1)Supply of Machinery (Safety) Regulations | 2008 |
Electrical Equipment (Safety) Regulations | 2016 | |
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
Designated standards: | EN ISO 13851:2019 EN 60947-5-1:2017 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 |
UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
Place and date of issue: | Wuppertal, April 8, 2022 |
Authorised signature Philip Schmersal Managing Director |
EU Declaration of Conformity |
Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
Name of the component: | SEPK02.0… / SEPG05.3… / SEP01.0… / SEP01.4… / SEPLC05.2… / SEP07… / SEP09.0… |
Type: | See ordering code |
Description of the component: | Two-hand control panel with1) and without emergency-stop (optionally with stand) |
Relevant Directives: | 1) Machinery Directive | 2006/42/EC |
Low Voltage Directive | 2014/35/EU | |
RoHS-Directive | 2011/65/EU |
Applied standards: | EN ISO 13851:2019 EN 60947-5-1:2017 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 |
Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
Place and date of issue: | Wuppertal, December 2, 2020 |
Authorised signature Philip Schmersal Managing Director |
Schmersal Nordiska AB, F O Petersons gata 28, S-421 31 Västra Frölunda
Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.
Generert til 22.11.2024, 08:03