.png?id=aad13e08b1c8f1adbb3bc1b36a87ee65){kind=logo}
SEPLC05.2.L.22
Varenummer:
101188796
Arkiv
SEPLC05.2.L.22
Varenummer:
101188796
Downloads
TraceParts
CAD Data
ePlan
Data
CADENAS
CAD Data
SISTEMA
Data
| Product type description: SEPK02.0.(1).(2).(3)/(4).(5) SEPG05.3.(1).(2).(3)/(4).(5) SEP01.0.(1).(2).(3)/(4).(5) SEP01.4.(1).(2).(3)/(4).(5) SEPLC05.2.(1).(2).(3)/(4).(5) SEP07.0.(1).(2).(3)/(4).(5) SEP09.0.(1).(2).(3)/(4).(5) |
| Command devices make and head diameter (control parts / emergency stop) depending on ➁ (with SEP09.0... emergency stop not featured) | |
| (1) | |
| 1 | Schmersal 55 mm / Schmersal 49 mm |
| 2 | Schmersal 42 mm / Schmersal 49 mm or Siemens 40 mm / Schmersal 49 mm |
| 3 | Schmersal 42 mm / Schmersal 38,5 mm or Siemens 40 mm / Siemens 40 mm |
| 4 | Schmersal 55 mm / Schmersal 38,5 mm |
| L | Empty enclosure with 22.3 mm holes (no command devices installed) |
| S-XXXX | Special version with 4-digit serial number |
| (2) | |
| 0 | Command devices from Schmersal |
| 1 | Command devices from Schmersal or Schmersal / Siemens |
| (3) | |
| 0 | Installation diameter of command devices (22.3 mm) |
| 1 | Installation diameter of command devices (30.5 mm) |
| (4) | |
| 95 | NC contacts and NO contacts of control parts in separated form |
| (5) | |
| E1 | Mushroom button with actuating force 10.5 N |
| E2 | Mushroom button with actuating force 7.0 N |
| Z1 | Emergency stop with 2 NC contacts and 2 NO contacts (not with SEPK02.0....) |
| Z2 | Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent instead of emergency stop) |
| Z3 | Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent instead of emergency stop) |
| Z4 | Switch interlock with 1 NC contact and 1 NO contact (yellow palm button with detent in addition to emergency stop) |
| Z5 | Switch interlock with 2 NC contacts and 2 NO contacts (yellow palm button with detent in addition to emergency stop) |
| Z6 | Pre-punched Al panel with 11 x Ø 22.3 mm holes (only for SEPLC05.2...) |
| Z7 | As with Z6 though holes are sealed with dummy plugs (only for SEPLC05.2...) |
Ikke alle mulige maskiner med denne typenøkkelen kan leveres og/eller er teknisk omsettelige.
- Aluminiumhus
- ubestykket med 3 monteringshull Ø 22,3 mm
- MERK: Tilgjengelig til 2015.12.31 (erstatning: -)
- Betjeningspanel for ekstra kommandoenheter og indikatorlamper
- Avtakbart aluminiumsbrett B x H = 230 x 150 mm
Bestillingsinformasjon
| Note (Delivery capacity) |
Ikke tilgjengelig! |
| Produkt-typebetegnelse |
SEPLC05.2.L.22 |
| Artikkelnummer (bestillingsnummer) |
101188796 |
| EAN (European Article Number) |
4250116203147 |
| eCl@ss number, version 12.0 |
27-37-12-19 |
| eCl@ss number, version 11.0 |
27-37-12-19 |
| eCl@ss-nummer, versjon 9.0 |
27-37-12-19 |
| ETIM number, version 7.0 |
EC001260 |
| ETIM number, version 6.0 |
EC001260 |
Tillatelser - Standard
|
cULus |
Gobale egenskaper
| Standard |
EN ISO 13850 EN ISO 13851 EN IEC 60947-5-1 EN IEC 60947-5-5 EN IEC 60947-1 |
| Kapslingsmateriale |
Aluminium |
| Materialet for husbelegg |
pulverbelagt |
| Materialet i tetningsplaten |
Aluminium |
| Fargen for kapsling |
RAL 7004 |
| Bruttovekt |
4 730 g |
Gobale egenskaper - Karakteristikker
| Egnet for NØD-AV |
Ja |
Mekaniske data - mål
| Bredde |
510 mm |
| Høyde |
160 mm |
| Dybde |
175 mm |
Omgivelsesbetingelser
| Tetthetsgrad |
IP54 |
Note
| Note (General) |
Valgfritt: aktuatorer med lav aktueringskraft |
Språk filter
Datablad
Bruksanvisning og konformitetserklæring
UL sertifikat
Last ned den nyeste versjonen av Adobe Reader
Produktbilde (enkelt katalogbilde)
Accessories
101024774 STPLC1
- Sveisekonstruksjon med gjengede hull for fiksering i gulv
- uten høydejustering
- uten Avstandsring
- kan kombineres med betjeningspanel SEP... skal brukes som tohånds fotbetjent stasjon
101022867 STP02.4.1
- med Avstandsring
- Sveisekonstruksjon med gjengede hull for fiksering i gulv
- med høydejustering
101022865 STP02.1.1
- uten Avstandsring
- Sveisekonstruksjon med gjengede hull for fiksering i gulv
- med høydejustering
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | SEPK02.0... / SEPG05.3... / SEP01.0... / SEP01.4... / SEPLC05.2... / SEP07... / SEP09.0... |
| Type: | See ordering code |
| Description of the component: | Two-hand control panel with1) and without emergency-stop (optionally with stand) |
| Relevant legislation: | 1)Supply of Machinery (Safety) Regulations | 2008 |
| Electrical Equipment (Safety) Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN ISO 13851:2019 EN 60947-5-1:2017 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, April 8, 2022 |
 |
| Authorised signature Philip Schmersal Managing Director |
| EU Declaration of Conformity | |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | SEPK02.0… / SEPG05.3… / SEP01.0… / SEP01.4… / SEPLC05.2… / SEP07… / SEP09.0… |
| Type: | See ordering code |
| Description of the component: | Two-hand control panel with1) and without emergency-stop (optionally with stand) |
| Relevant Directives: | 1) Machinery Directive | 2006/42/EC |
| Low Voltage Directive | 2014/35/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN ISO 13851:2019 EN 60947-5-1:2017 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, December 2, 2020 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal Nordiska AB, F O Petersons gata 28, S-421 31 Västra Frölunda
Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.
Generert til 26.12.2024, 13:46