PS216-T11-S221

Varenummer: 103035352

PS216-T11-S221

Varenummer: 103035352

Downloads

TraceParts CAD Data

ePlan Data

CADENAS CAD Data

SISTEMA Data

Product type description:
PS(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-(11)-(12)

(1)
without	non-EX version
EX	Types of protection Ex d and t, to Zone 1/21
EXI	Types of protection Ex i and t, up to Zone 1/21

(2)
215	Metal enclosure
216	Thermoplastic enclosure
226	Plastic housing with 2 cable entries

(3)
L	L-hole (standard)
	elongated hole

(4)
Z11	Snap action 1 NO contact / 1 NC contact
Z02	Snap action 2 NC contacts
Z12	Snap action 1 NO contact / 2 NC contact
Z11R	Snap action 1 NO contact / 1 NC contact with latching
Z01R	Snap action 1 NC contact with latching
Z02R	Snap action 2 NC contacts with latching
T11	Slow action 1 NO contact / 1 NC contact
T02	Slow action 2 NC contacts
T20	Slow action 2 NO contact
T12	Slow action 1 NO contact / 2 NC contact
T21	Slow action 2 NO contact / 1 NC contact
T03	Slow action 3 NC contacts
T11UE	Slow action 1 NO contact / 1 NC contact with overlapping contacts
T02H	Slow action 2 NC contacts with staggered contacts
T11K	Slow action 1 NO contact + 1 NC contact - short-stroke
T10	Slow action 1 NO contact
T02K	Slow action 2 NO contacts short-stroke
T20H	Slow action 2 NO contacts staggered

(5)
A1	Contacts silver plated (Standard)
A2	Gold contacts 0,3 μm
A3	Gold contacts 1,0 μm
	Gold contacts 3,0 μm

(6)
G	without indication light
	integrated status display

(7)
M16	Cable entry M20
ST	cable entry M16
STR	Connector plug M12 - plastic - bottom
STL	Connector plug M12, right
STM	Connector plug M 12, left
	Connector plug M12, metal

(8)
S200	plunger S200 Ø 6 mm
S210	Plunger Ø 8,6 mm
S211	Plunger Ø 10,3 mm
S221	Plunger Ø 9,8 mm
R200	Roller plunger R200
R201	Roller plunger - stainless steel roller Ø 9,5mm
R210	Roller plunger - plastic roller Ø 12mm
K201	Roller plunger - stainless steel roller - width 5,3 mm - Ø 12mm
K200	Offset roller lever - plastic roller- width 5.3 mm - Ø 12 mm
K201	Roller plunger - stainless steel roller - width 5,3 mm - Ø 12mm
K210	Offset roller lever - plastic roller- width 5mm - Ø 14mm
K211	Offset roller lever - stainless steel roller - width 5mm - Ø 14mm
K220	Offset roller lever - plastic roller- width 7.6 mm - Ø 14 mm
K230	Angle roller lever - plastic roller Ø 14 mm
K231	Roller plunger - stainless steel roller Ø 14mm (Standard)
K240	Angle roller lever with plastic roller Ø 22 mm - right-bent
K250	Angle roller lever with plastic roller Ø 22 mm - left-bent
H200	Roller lever - plastic roller Ø 16 m - lever length 24 mm
H202	Roller lever - brass roller Ø 16mm - lever length 24mm (Standard)
H230	Roller lever - plastic roller Ø 16mm - lever length 28 mm
H232	Roller lever - brass roller Ø 16mm - lever length 28 mm
H236	Roller lever - rubber roller Ø 16mm - lever length 28 mm
N200	Roller lever 2 mm Toothing (24...26mm) - Plastic roller Ø 20 mm - Width 9.8 mm
N201	Roller lever adjustable in 2 mm steps (24...66mm) - stainless steel roller Ø 20mm - width 9,8 mm
N202	Roller lever - adjustable in 2 mm steps (24...66mm) - brass roller Ø 20mm - width 9,8 mm
N206	Roller lever - adjustable in 2 mm steps (24...66mm) - rubber roller Ø 50mm - width 16 mm
N210	Roller lever - adjustable in 2 mm steps (26...66 mm) - plastic roller Ø 20mm - width 4 mm - long- angled - locking washer
N280	Roller lever -adjustable in 2 mm steps (24...66mm) - plastic roller Ø 20mm - width 5 mm - long - locking washer
J200	Rod lever - plastic - 200mm -Ø 6mm
J201	Rod lever - stainless steel - 200mm -Ø 6mm (Standard)
J203	Rod lever - aluminium - 200mm -Ø 6mm
F230	Spring rod - stainless steel - 150.4 mm
F231	Spring rod - stainless steel - 70.2 mm
A200	Special actuating bolt - plastic - valve control

(9)
U1	no intent rotation (Standard)
U2	intent rotation 45°
U3	intent rotation 90°
U4	intent rotation 135°
U5	intent rotation 180°
U6	intent rotation 225°
U7	intent rotation 275°
	intent rotation 315°

(10)
X1	no lever rotation (Standard)
X2	lever rotation 15°
X3	lever rotation 30°
X4	lever rotation 45°
X5	lever rotation 60°
X6	lever rotation 75°
X7	lever rotation 90°
X8	lever rotation 105°
X9	lever rotation 120°
X10	lever rotation 135°
X11	lever rotation 150°
X12	lever rotation 165°
X13	lever rotation 180°
X14	lever rotation 195°
X15	lever rotation 210°
X16	lever rotation 225°
X17	lever rotation 240°
X18	lever rotation 255°
X19	lever rotation 270°
X20	lever rotation 285°
X21	lever rotation 300°
X22	lever rotation 315°
X23	lever rotation 330°
	lever rotation 345°

(11)
I	Roller outside (Standard)
	Roller inside

(12)
T	-30...+80°C (Standard)
	-40...+80°C

(13)
Speze	-9990

(14)
without	Zone 2 and 22
3GD	Zone 2 and 22
2D	Zone 21
3D	Zone 22

Ikke alle mulige maskiner med denne typenøkkelen kan leveres og/eller er teknisk omsettelige.

Hurtig tilkoblingsteknologi ettersom tilkoblingsterminalene roteres 45°
kabelinngang 1 x M20 x 1, 5
hus i termoplast med sammenleggbart forriglingsdeksel
Enkelt og raskt å justere styringselementene med 45°.
Konstruksjon iht. EN 50047
Lysdiodeversjon tilgjengelig

Bestillingsinformasjon

Produkt-typebetegnelse	PS216-T11-S221
Artikkelnummer (bestillingsnummer)	103035352
EAN (European Article Number)	4030661539744
eCl@ss number, version 12.0	27-27-26-01
eCl@ss number, version 11.0	27-27-26-01
eCl@ss-nummer, versjon 9.0	27-27-26-01
ETIM number, version 7.0	EC000030
ETIM number, version 6.0	EC000030

Tillatelser - Standard

Data

cULus

CCC

Gobale egenskaper

Standard	EN IEC 60947-5-1
Huskonstruksjonsform	Normkonstruksjonsdesign
Aktivatortype iht. DIN EN 50047	B
Kapslingsmateriale	Plast, glass-fiber-forsterket
Materiale for aktivator	Rustfritt stål (V4A)
Plungermateriell	Stainless steel (V2A)
Bruttovekt	101 g

Gobale egenskaper - Karakteristikker

Sikkerhetsfunksjoner	Ja
Antall eksterne kontakter	1
Antall sikkerhetskontakter	1

Klassifisering

Standarder, forskrifter	EN ISO 13849-1
B_10D Normally-closed contact (NC)	20 000 000 bevegelser
Mission time	20 år

Mekaniske data

Betjeningselement	stempel S200
Posisjonen til kabelgjenomføringen	bunn
Mekanisk levetid, minimum	10 000 000 bevegelser
Tvangsbrytende kraft, minimum	40 N
Aktueringshastighet, minimum	60 mm/min
Aktueringshastighet, maksikum	1 m/s
Tightening torque of the fixing screws	1,2 Nm

Mechanical data - Connection technique

Konnektor stikk	Skrueforbindelse M20 x 1.5
Kabeldimensjon, minimum	0,34 mm²
Kabeldimensjon, maksimum	1,5 mm²
Tightening torque of electrical connection, minimum	0,6 Nm
Tightening torque of electrical connection, maximum	0,8 Nm
Note (Cable entry)	Settle length of the conductor: 5...6mm

Mekaniske data - mål

Lengde på sensor	32,5 mm
Bredde på sensor	31 mm
Høyde på sensor	75,5 mm

Omgivelsesbetingelser

Tetthetsgrad	IP66 IP67
Ambient temperature	-30 ... +80 °C
Protection class	II

Ambient conditions - Insulation values

Isolasjonsspenning	250 VAC
Nominell impulsmotstandsspenning	4 kV
Forurensningsgrad iht. IEC/EN 60947-1	3

Elektriske data

Termisk teststrøm	10 A
Nødvendig nominell kortslutningsstrøm iht EN 60947-5-1	400 A
Utstyrskategori AC-15	240 VAC
Utstyrskategori AC-15	3 A
Utstyrskategori DC-13	24 VDC
Utstyrskategori DC-13	3 A
Koblingselement	1 NO-kontakt, 1 NC-kontakt
Bryteprinsipp	Glidekontakt
koplingsfrekvens	5 000 /h
Materiale for kontakter, elekrisk	Sølv

Produktbilde (enkelt katalogbilde)

ID: kps2l-sf20

| 793,0 kB | .jpg | 352.778 x 774.7 mm - 1000 x 2196 px - 72 dpi

| 95,3 kB | .png | 74.083 x 162.631 mm - 210 x 461 px - 72 dpi

| 26,3 kB | .jpg | 56.092 x 123.472 mm - 159 x 350 px - 72 dpi

Dimensjonsriktig tegning grunnenhet

ID: kps2xg12

| 131,7 kB | .jpg | 352.778 x 314.325 mm - 1000 x 891 px - 72 dpi

| 7,4 kB | .png | 74.083 x 65.969 mm - 210 x 187 px - 72 dpi

Dimensjonsriktig tegning betjener

ID: kps2-b23

| 198,8 kB | .jpg | 352.778 x 249.414 mm - 1000 x 707 px - 72 dpi

| 11,6 kB | .png | 74.083 x 52.564 mm - 210 x 149 px - 72 dpi

Brytervandringsdiagram

Noter til brytervandringsdiagram
ICO_LEG_sw-close Kontakt på
ICO_LEG_sw-open Kontakt av
ICO_LEG_sw-var Innstillingsområde
ICO_LEG_sw-l Pausepunkt
ICO_LEG_sw-p Tvangsåpningsvei/ -vinkel
VS justerbart område NO-kontakt
VÖ justerbart område NC-kontakt
N etterløp'

Koplingsrutene som vises for lukker- og åpnerkontaktene, kan overføres til andre kontaktkombinasjoner.

ID: kps11s04

| 1,8 kB | .png | 74.083 x 29.986 mm - 210 x 85 px - 72 dpi

| 51,9 kB | .jpg | 352.778 x 142.522 mm - 1000 x 404 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: kps2xk09

| 57,7 kB | .jpg | 352.778 x 110.067 mm - 1000 x 312 px - 72 dpi

| 2,7 kB | .png | 74.083 x 22.931 mm - 210 x 65 px - 72 dpi

Video ID: Positionsschalter-PS

Position switches series PS (Vimeo)

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

PS116,
PS215, PS216, PS226,
PS315, PS316

Type:

See ordering code

Description of the component:

Position switch

Relevant Directives:	Low Voltage Directive	2014/35/EU
	RoHS-Directive	2011/65/EU

Applied standards:

EN 60947-5-1:2017

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, March 3, 2021

Authorised signature
Philip Schmersal
Managing Director

UK Conformity Declaration

Pdf

UK Declaration of Conformity

Company:

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.

Name of the component:

PS116,
PS215, PS216, PS226,
PS315, PS316

Type:

See ordering code

Description of the component:

Position switches

Relevant legislation:	Electrical Equipment (Safety) Regulations	2016
	The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations	2012

Designated standards:

EN 60947-5-1:2017

UK-Importer /
Person authorised for the compilation of the technical documentation:

Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL

Place and date of issue:

Wuppertal, August 19, 2021

Authorised signature
Philip Schmersal
Managing Director

Schmersal Nordiska AB, F O Petersons gata 28, S-421 31 Västra Frölunda

Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.

Generert til 12.12.2024, 14:14

Handlekurv

Logg på Registrering

PS216-T11-S221

PS216-T11-S221

Bestillingsinformasjon

Tillatelser - Standard

Gobale egenskaper

Gobale egenskaper - Karakteristikker

Klassifisering

Mekaniske data

Mechanical data - Connection technique

Mekaniske data - mål

Omgivelsesbetingelser

Ambient conditions - Insulation values

Elektriske data

Språk filter

Datablad

Bruksanvisning og konformitetserklæring

UL sertifikat

CCC-sertifisering

Brosjyre

SISTEMA-VDMA Bibliotek/Library

Last ned den nyeste versjonen av Adobe Reader

Produktbilde (enkelt katalogbilde)

Dimensjonsriktig tegning grunnenhet

Dimensjonsriktig tegning betjener

Brytervandringsdiagram

Diagram

Video ID: Positionsschalter-PS