.png?id=63182abd9f3f42c5479fde3c4f28d70c){kind=logo}
SFB-PN-IRT-8M12-IOP-V2
- PROFINET / PROFIsafe用セーフティフィールドボックス
- 最大8つのセーフティスイッチの接続用
- 内蔵デュアルポートスイッチ、IRT対応
- 保護構造 IP67
注文データ
| Product type description |
SFB-PN-IRT-8M12-IOP-V2 |
| 部品番号（注文番号） |
103040357 |
| EAN（欧州部品番号） |
4030661561554 |
| eCl@ss number, version 12.0 |
27-24-26-04 |
| eCl@ss number, version 11.0 |
27-24-26-04 |
| eCl@ss番号、バージョン9.0 |
27-24-26-04 |
| ETIM number, version 7.0 |
EC001599 |
| ETIM number, version 6.0 |
EC001599 |
認証
|
TÜV cULus UKCA |
一般データ
| 規格 |
EN IEC 61131-1 EN IEC 61131-2 EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| ハウジング 材質 |
熱可塑性樹脂性, ポリアミド PA 6 GF |
| 識別ラベルの材質 |
Plastic, Polyamide PA |
| Material of viewing window |
Polyamide PACM 12 |
| Material of electronic encapsulation |
Polyurethane 2K PU |
| 総重量 |
655 g |
一般データ - 仕様
| 一体型システム診断、一般 |
Yes |
安全性評価
| 規格 |
EN ISO 13849-1 EN IEC 61508 |
安全性評価 - 安全人力 2 チャンネル
| Performance Level, up to |
e |
| カテゴリー |
4 |
| Diagnostic Coverage (DC) Level |
99 % |
| PFH値 |
1.10 x 10⁻⁹ /h |
| PFDavg |
9.60 x 10⁻⁵ |
| Safety Integrity Level (SIL), suitable for applications in |
3 |
| 使用期間 |
20 年 |
| Response time of local safety input ⇒ Fieldbus, maximum |
20 ms |
| Notice |
The SFB fulfils the requirements as PDDB (proximity switch with defined behaviour under fault conditions) according to EN 60947-5-3 in combination with magnetic sensors (2 NC contacts) up to PL e / SIL 3. |
安全性評価 - 安全入力 1 チャンネル
| Performance Level, up to |
d |
| カテゴリー |
2 |
| Diagnostic Coverage (DC) Level |
90 % |
| PFH値 |
2.30 x 10⁻⁷ /h |
| PFDavg |
2.00 x 10⁻² |
| Safety Integrity Level (SIL), suitable for applications in |
1 |
| 使用期間 |
20 年 |
| Response time of local safety input > Fieldbus, maximum |
20 ms |
| Test interval for error detection |
10 s |
安全性評価 - 安全出力 1 チャンネル
| Performance Level, up to |
d |
| カテゴリー |
3 |
| Diagnostic Coverage (DC) Level |
90 % |
| PFH値 |
1.00 x 10⁻⁷ /h |
| PFDavg |
8.80 x 10⁻³ |
| Safety Integrity Level (SIL), suitable for applications in |
2 |
| 使用期間 |
20 年 |
| Reaction time Fieldbus > local safety output |
50 ms |
安全性評価 - 安全出力 2 チャンネル
| Performance Level, up to |
e |
| カテゴリー |
4 |
| Diagnostic Coverage (DC) Level |
99 % |
| PFH値 |
1.20 x 10⁻⁹ /h |
| PFDavg |
1.10 x 10⁻⁴ |
| Safety Integrity Level (SIL), suitable for applications in |
3 |
| Notes (Safety Integrity Level) |
This product must only be replaced in the application by an identical product of type SFB-PN-IRT-8M12-IOP-V2 with part no. 103040357. The older product version has a lower safety level. |
| 使用期間 |
20 年 |
| Reaction time Fieldbus > local safety output |
50 ms |
機械的データ
| 取り付け |
ネジ |
| Type of the fixing screws |
2x M6 |
| Tightening torque of the fixing screws, maximum |
3 Nm |
| Type of the fixing screws, viewing window |
2x TX10 (Torx) |
| Tightening torque of the fastening screws for the viewing window, maximum |
0.6 Nm |
機械的データ - 電気機械式
| 端子 コネクター |
M12 コネクターソケット/コネクター |
| 端子コネクター, 入力/出力 |
X0 - X7: M12, 8-pole, A-coded |
| Terminal Connector, Power I/O |
M12 POWER, 4-pole, T-coded |
| Terminal Connector, Field bus |
M12, 4-pole, D-coded |
| Tightening torque of electrical connection, minimum |
0.8 Nm |
| Tightening torque of electrical connection, maximum |
1.5 Nm |
機械的データ - 寸法
| 長さ |
222.8 mm |
| 幅 |
63 mm |
| 高さ |
36.1 mm |
環境条件
| 保護等級 |
IP66 IP67 |
| Ambient temperature |
-25 ... +55 °C |
| Storage and transport temperature |
-25 ... +70 °C |
| 相対湿度, 最小 |
10 % |
| 相対湿度, 最大 |
95 % |
| Note (Relative humidity) |
non-condensing |
| EN 60068-2-6に基づく耐振動 |
10 ~ 150 Hz, 振幅 0.35 mm / 5 g |
| 耐衝撃 |
30 g / 11 ms |
| Protection class |
III |
| Permissible installation altitude above sea level, maximum |
2,000 m |
環境条件 - 絶縁値
| 定格絶縁電圧 |
32 VDC |
| 定格インパルス耐電圧 |
0.8 kV |
| Overvoltage category |
III |
| IEC/EN 60664-1に準拠した汚染度 |
3 |
電気的データ
| Operating voltage |
24 VDC -15 % / +10 % |
| 動作電流 |
200 mA |
| Rated operating voltage |
24 VDC |
| 動作電流 |
10,000 mA |
| 注意（電気的データ、ヒューズ定格） |
External fuse protection required ≤ 10A slow blow when used to UL 61010. |
| 準備時間、最大 |
8,000 ms |
| Device Watchdog Time |
10 ms |
| Device Acknowledgement Time, maximum |
25 ms |
| Reaction Time Safety Input, maximum |
20 ms |
| Reaction Time Safety Output, maximum |
50 ms |
電気的データ - 通信プロトコル
| Feldbus Protokoll |
PROFINET / PROFIsafe |
| Fieldbus specification |
V2.3, Conformance Class C |
| Specification safety fieldbus |
V2.4 |
| Fieldbus properties |
Media Redundancy Protocol (MRP) Fast Start Up |
| Fieldbus network load class |
3 |
| Transfer rate |
100 Mbit/s Full Duplex |
| Adressing |
Discovery and Configuration Protocol (DCP) |
| Integrated switch |
Dual Port, 100 Mbit/s, IRT capable |
| Fieldbus services |
I&M0 ... I&M3, SNMP, LLDP |
| Service interface |
WEB-Interface HTTP |
電気データ-デバイスポート
| Bezeichnung, Geräteanschlüsse |
X0 ... X7 |
| Cable length, device port |
30 m |
電気的データ - 外部機器への電源供給
| Designation, Power supply |
A1 and A2 |
| Rated operating voltage |
24 VDC |
| Rated operating current |
800 mA |
| Internal electrical fuse |
1.5 A (Integrated automatic resettable fuse) |
Electrical data - Safety digital inputs
| Designation, Safety inputs |
X1 and X2 |
| フェイルセーフ入力のスイッチングの閾値 |
−3 V … 5 V (Low) 13 V ... 30 V (High) |
| 24Vの時の安全入力の消費電流 |
6 mA |
| Permissible residual drive current |
1 mA |
| Test pulse duration, minimum |
0.01 ms |
| Test pulse duration, maximum |
1 ms |
| Test pulse interval, minimum |
20 ms |
| Test pulse interval, maximum |
120,000 ms |
| Classification ZVEI CB24I, Sink |
C1 |
| Classification ZVEI CB24I, Source |
C1 C2 C3 |
Electrical data - Safety digital outputs
| Designation, Safety outputs |
DO |
| 安全出力 |
short-circuit proof, p-type |
| Voltage drop Ud, maximum |
2 V |
| Leakage current Ir, maximum |
0.5 mA |
| Voltage, Utilisation category DC-12 |
24 VDC |
| Current, Utilisation category DC-12 |
0.8 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
0.8 A |
| Note, Utilisation category DC-13 |
Inductive load, maximum 400 mH |
| Switching frequency, maximum |
1 Hz |
| Test pulse duration, maximum |
1 ms |
| Test pulse interval, minimum |
15 ms |
| Test pulse interval, maximum |
500 ms |
| Classification ZVEI CB24I, Source |
C1 |
| Classification ZVEI CB24I, Sink |
C1 |
電気的データ - 診断入力 / FB-インターフェース
| Designation, Diagnostic inputs / FB-Interface |
DI |
| Switching thresholds |
−3 V … 5 V (Low) 15 V … 30 V (High) |
| Current consumption at 24V |
12 mA |
| Input debounce filter |
10 ms |
| Data transfer rate FB-Interface |
19,2 kBaud |
電気的データ - テストパルス出力
| Designation, Test pulse outputs |
Y1 and Y2 |
| Design of control elements |
short-circuit proof, p-type |
| Voltage drop Ud, maximum |
1 V |
| Current leakage Ir, maximum |
0.5 mA |
| Voltage, Utilisation category DC-12 |
24 VDC |
| Y1 rated current at 24 V |
15 mA |
| Y2 rated current at 24 V |
10 mA |
| Y2 rated current at 0 V |
30 mA |
| Test pulse interval, typical |
500 ms |
| Test pulse duration, maximum |
1 ms |
| Classification ZVEI CB24I, Sink |
C1 |
| Classification ZVEI CB24I, Source |
C1 |
LED状態表示 - LED 01
| LED status |
Error LED device port |
| LED position |
E: 0 ... 7 |
| LED colour |
green/red |
LED状態表示 - LED 02
| LED status |
Input LED device port |
| LED position |
I: 0 ... 7 |
| LED colour |
Yellow |
LED状態表示 - LED 03
| LED status |
LED Link Ethernet port |
| LED position |
L: P1 + P2 |
| LED colour |
Green |
LED状態表示 - LED 04
| LED status |
LED Activity Ethernet port |
| LED position |
A: P1 + P2 |
| LED colour |
Yellow |
LED状態表示 - LED 05
| LED status |
System fault LED |
| LED position |
"SF": Module |
| LED colour |
green/red |
LED状態表示 - LED 06
| LED status |
BUS fault LED |
| LED position |
"BF": Module |
| LED colour |
Red |
LED状態表示 - LED 07
| LED status |
Fieldbox error LED |
| LED position |
"Err": Module |
| LED colour |
green/red |
LED状態表示 - LED 08
| LED status |
Power-LED fieldbox |
| LED position |
"Pwr": Module |
| LED colour |
Green |
その他のデータ
| 注意 (アプリケーション) |
Safe field box with decentralised I/Os |
言語フィルター
データシート
Operating instructions and Declaration of conformity
Getting Started
BG-test certificate
UL Certificate
UKCA certificate
Device description files
Configuration software (document with link)
Brochure
General information
SISTEMA-VDMA library
Adobe Readerの最新版をダウンロードしてください
Product picture (catalogue individual photo)
Dimensional drawing basic component
Video ID: Mr-Safety-SFB-PN
(Vimeo)
103035090 ACC-PFB-SFB-LAB-SN-20PCS-V2
- Designation label V2
103013920 ACC-PFB-SFB-M12-PCAP-10PCS
- M12 Protecting caps
103041447 ACC-PFB-SFB-VWIN-SCR
- Viewing window with screws
103041446 ACC-SFB-EARTH-STRAP-100MM
- Earth strap complete
103013919 ACC-PFB-SFB-SLLAB-4PCS
- Seal label viewing window
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | SFB |
| Type: | See ordering code |
| Description of the component: | Safety fieldbox (IO module with fieldbox interface) |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 61131-2:2007 EN 60947-5-3:2013 EN ISO 13849-1:2015 IEC 61508 parts 1-7:2010 |
| Notified body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
| EC-Type Examination Certificate: | 01/205/5878.00/22 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, May 4, 2022 |
 |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | SFB-PN-IRT SFB-EIP |
| Type: | See ordering code |
| Description of the component: | Safety fieldbox (IO module with fieldbox interface) |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 61131-2:2007 EN 60947-5-3:2013 EN ISO 13849-1:2015 EN 61508 parts 1-7:2010 |
| Approved body for Type Examination: | TÜV Rheinland UK Ltd. 1011 Stratford Road Solihull, B90 4BN ID: 2571 |
| Type examination certificate: | 01/205U/5878.01/23 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, October 16, 2023 |
|
| Authorised signature Philip Schmersal Managing Director |
シュメアザー株式会社, 〒222-0033 横浜市港北区新横浜3-9-5, 新横浜第3東昇ビル
データと詳細は完全にチェックされました。画像は元の画像と異なる場合があります。技術的なデータはマニュアルで見られます。技術的に変更されたり、エラーの可能性があります。
Generated on 2024/11/11 9:48
最近見た製品
